Hi all, since ya’ll are self hosters, I’m sure you all deal with all sorts of different pieces of hardware, accessories, peripherals, and what not; just wondering if you could please share your favorite, solid, “go to” brands for overall things you need for your setup such as cables (all types), adapters, dongles, power accessories, hubs & docks, flash drives, you name it! I’m sure it varies depending on exactly what type of equipment you’re looking for but just looking for overall good brands to stick with for such things. I obviously know the main ones like Anker, Cable Matters, Ugreen, maybe Belkin, Idk. Would love to hear your recommendations! Thank you
Open source project device support pages are always my first stop. If you have access to a git repo for the project, use gource to visualize who is doing what and where within the project recently. This will make it obvious what hardware the main devs are invested in the most, and therefore what will have the best support and user experience.
Wow that is amazing, thanks for sharing.
Servers: Supermicro. Dell in a pinch
Switches: HPE Aruba for 10gig, or Mellanox for 100gig
Routers: I’m not that picky, but I use Fortigate as I scavenged some leftovers at work
UPS: Eaton
Network cards: Intel for 10gig, IBM for 8 or 16gig, Mellanox for 100gig
Harddrives: Exos
RAID stuff: LSI MegaRaid.
GPU: Don’t really care, but I have a bunch of NVidia Quadro.Most of the above preferences are due to scavenging leftover hardware at work.
Wow wow wow, you guys are light years ahead of me in the equipment department. I plan to learn and utilize a lot of that stuff but I was more interested in the smaller everyday things like chargers, cables, flash drives, adapters, etc lol still great info though. I was super intruided by supermicros server selection when I went down that rabbit hole. Truth is, I’m not nearly ready for a server yet.
Depends on which aspect of you needs to be ready. Use case and functionality? Meh, now is as good time as any. Might as well get used to the differences from a desktop to servers early on. Especially if you still don’t really have the knowledge. Learn by doing!
Budget? True, they can be pricey, even on the after market. But if you or a friend works anywhere that had servers, chances are that the IT department might have something that’d otherwise end up in the trash. A good example here is this VM server with rather old CPUs and 256G of RAM. It wasn’t fit for its pyrpose anymore, and its hardware configuration made it a bad match for our storage clusters. Today it’s a minecraft server for my kids and their friends.
EDIT: Actually, the older PowerEdge servers feom Dell aren’t that pricey on my local marketplace.
Thanks! I certainly do plan to venture into servers, but its a tad too confusing ATM as I’m currently trying to learn other things and projects right now. Homelabbing is definitely a future plan and goal of mine :)
Damn son, are you me back when I worked at a MSP? Good taste in gear 💪😎💪
Nah, I work for a geophysical company with a bunch of storage clusters and data crunchers around the world.
For networks, much of it depends on budget and requirement. Do you want home security cameras on your network? Are you someone who works with large files all the time? Do you have gig plus Internet speeds? Do you own or rent? Lots of factors can affect choices. Start from there and build the infrastructure that works for your need. Don’t go looking to build a monster you’ll never really get moving, that’s a waste. Brand will become a factor once you look at the capabilities you need, you’ll see names come up over and over. At the consumer level, there are a few but price is also a factor. Not much help, I know.
I gotcha, that makes sense. I’m really at the beginning of my homelab or self hosting journey. I’ve been exploring alot of random aspects and keep forgetting to think about the basic things first. My problem is figuring out how to start and setup things properly, but that’s a whole other thread/story lol
Remember power!
First and foremost, well-grounded power is essential. I haven’t done the whole house thing yet, but I am thinking about it and curious to know of other’s stories.
For surge protectors, I like GE wall taps for form factor and Furman racks when there is space & need.
For an uninterruptible power supply, I like APC. While they aren’t made in the USA like they used to (RIP), they have been reliable for me.
Network (ISP Modem, WIFI, Switch) and tower CPU are all driven by UPS power. APC UPS, at least, is always drawing off the battery, so the upstream electronics are protected…a massive surge is far more likely to take out the battery. For laptops, surge protection is enough.
I have not yet surge-protected the ISP lower power input… this is a real risk! I found a cheap one off Amazon, but I am worried it will degrade the network --> whole house may be better.
Note - I have had a lightning strike get sent down the cable line, enter the home, blow out the cable modem, traverse into the network switch, blow out the switch, and nuke every active ethernet port (NAS, Apple TV, etc.), as well as jump the wire into low power security, physically blowing a hard-wired security panel off the wall and damaging a few hard-wired security points. Pretty crazy!
Holy crap thats crazy! Are simple things like surge protectors pretty much equal? Is there a point in researching brands for such a presumably simple thing?
Depends, it’s all a gamble. Think of it like this … how much do you spend on your kit? A top end GPU is $1500 USD. A decent surge protector might cost $15. However suppose you cheap out and get one for $9.99…then a surge blows thru it and smokes your mobo&gpu. how much did that $5 in savings cost you?
there is quite a bit that goes into it. And yet it’s not magic. Also, protection does wear out as load & surge is applied. So it’s not really worth it to pay top end, over and over, at least imo.
I’ve been liking Mikrotik stuff for networking lately. Not as user friendly GUI as Ubiquiti but definitely not as expensive.
I have heard alot of really good things about Mikrotik. I haven’t explored them as I haven’t had many networking needs, but maybe I’ll take a look at their offerings. Thanks
Just bought a Mikrotik LHGG kit for LTE internet and went from about 3-5 Mbit/s down with a TP-link (archer 400 something) to 30-150mbit/s down and much more stable. I’m really impressed with it and WinBox and will for sure have a good look at their switches when it comes to putting up the home network infrastructure. Though, as you said, you need to know what you are doing and need a better understanding of networking but it also gives you a better flexibility and more things that are possible to do.
- Server MB: Asrock Rack
- Other server hardware: Silverstone
- Peripherals: Steelseries
- NAS HDDs: Seagate
- NAS SSDs: Seagate (pcie4) or WD (pcie3)
- SSDs: Sabrent, Samsung
Awesome thanks. What about the smaller stuff though??? Any personal preference?
Both Anker and Ugreen does good GAN chargers, but Anker is bad at doing good cables (2 of 3 usbc to usbc cable failed during the first year of use). I only had 1 cable from Ugreen, and I don’t use it often, so I can’t tell if they are good yet.
Other than that I don’t have much to say about small electronics, except maybe avoid Asus Laptops. Got 3 of them during my lifetime, all got pretty big problems, ranging from bad screens to dead touchpad and motherboards. They even forgot to connect the internal audio cable during the motherboard replacement, had to sent it back a second time 😅.
Haha yes!!! Same here with Asus laptops. I’ve gone through two and had issues with both. Mainly touchpad issues. But that’s surprising to hear your stance on anker cables. Tbh I’ve found all usb c cables to be SUPER finicky thus far. Like sometimes just the slightest movement of the cable and it automatically disconnects. Heck one time my cat simple stepped on a cable and it caused a disconnection smh very annoying stuff
May be a bad usbc port on one end. My old Nokia 8.1 was known to have a bad usbc connector (mine was impacted), and I ended up switching smarphone because of that. Now I’m waiting for my new phone once again (Fairphone 5), at least this one is easier to repair 😅
Yea I’ve definitely had issues with my usb c ports on my laptop. The shitty thing is, my laptop ONLY has two ports, both being usb c. They’ve become loose over the years of wear and tear and I had a shop manage to replace one and he said the other is perfectly fine. I mean he had a tester and showed me the voltage or amperage and the ports work, but they are still so finicky. As mentioned, just the slightest little movement of a cable or flash drive and they disconnect and then reconnect. Super annoying. I can’t wait to get a dock so I dont have to depend on just these two usb ports and all the annoying adapters and such
