You can download the files on:

Thingiverse: https://www.thingiverse.com/thing:6615905

Printables: https://www.printables.com/model/874747

FreeCAD Design Files: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/GLoA E-Reader Cases/6 inch

The files are for all the 3D Printable components which makes up the e-reader case. What’s not included in the files is the cutting profiles for the case that holds it. But you can just use duck tape or some flexible adhesive and it’ll work. Along with the screws, nuts and magnets required.

  • Scrath@lemmy.dbzer0.comEnglish
    2·
    7 months ago

    Here is the link to the forum post of the autoshelf mod. It says its for the Aura but I have it working on the Clara 2E and I believe someone reported it also working on the Libra or whatever the 7 inch model was called.

    It’s a simple to install but unfortunately a bit fiddly in my opinion. When you plug the reader in via usb, a symbol appears on the device screen that you can tap to run autoshelf upon usb disconnect. Unfortunately it only works on books that have already been added to the device, so you have to plug your reader in twice. Once to transfer the books and a second time to run autoshelf on the added books.

    I also use NickelMenu in which I added a button to run autoshelf without having the USB plugged in. My script works by pretending the USB was plugged in, thereby showing me the usb screen and allowing me to tap the autoshelf symbol and then waiting for around 10-15 seconds before “unplugging” the USB again which causes the autoshelf to execute.

      • Scrath@lemmy.dbzer0.comEnglish
        2·
        7 months ago

        That’s the fun thing about the Kobo being linux based. Once you get shell access the flood gates are open. I transfer my books over SFTP instead of plugging in USB everytime and then execute the book scan from NickelMenu.