For years I’ve had a dream of building a rack mounted PC capable of splitting its resources to host multiple GPU intensive VMs:
- a few gaming VMs
- a VM for work that can run Davinci Resolve and Blender renders
- an LLM server
- a Stable Diffusion server
- media server
Just to name a few possibilities…
Everytime I’ve looked into it, it seemed like the technology just wasn’t there yet. I remember a few years ago Linus TT took a shot at it, but in the end suggested the technology (for non-commercial entities) just wasn’t in a comfortable spot yet.
So how far off are we? Obviously AI focused companies seem to make it work, but what possibilities exist for us self-hosters who might also want to run multiple displays in addition to the web gui LLM servers? And without forking out crazy money for GPU virtualization software licenses?
As others have expressed- were already there. Understand though that the reason this hasn’t caught on mainstream is the entire purpose of what you are asking is simple: it runs counter to the standards of commercial capitalism. We are talking about efficiency, self hosting, doing more with less, and cutting strings.
That said- understand that what you are undertaking is not dissimilar from building infrastructure in a company. You are building and expanding to meet your needs. Your needs are unique so there isn’t a ‘turn key’ solution that will fit perfectly… so you need to try things and see what works.
As far as things you are talking about specifically: you are going to ultimately be dipping your toes into the virtualization world… so xcp-ng and proxmox are good choices. If you can get your hands on older copies and uh… source a key or two: esxi is also very beginner friendly but won’t be able to upgrade thanks to their new pricing model. You seem like you are aware of the YouTube sphere so let me recommend 2GuysTech and the series on different hypervisors.
Once you decide on a hypervisor it’s as ‘simple’ as building a PC to meet your needs. If you have one already I’d start there to get a feel for how much you can pull out of it to determine how much you may need. You can probably split up a single GPU or just pass it through (cost vs performance.). LLMs are power / resource hungry so that may require it’s own GPU.
If power is cheap by you you can look into older server hardware but honestly this can be a messy space to dabble in (noise, heat, power costs.)
From there play with services that fit your needs.
It’s very doable and there are some easier paths to take… certainly- but again the thing about homelabs is it’s very custom. This is why the community (in general) is willing to help. We all have had to forge the same path.
None of the presented solutions cover the aspect of being in a different place than the rack, the same network is fine, but at a minimum a different room.
How do you deliver high resolution (e.g. 1440p, 144 fps) to multiple monitors with low latency over a network? I haven’t seen anything like that accomplished without running fiber from the host.
Eventually, your thin client will need too much power anyway, making the costs rise a lot. It makes sense in an office where you have 500 seats and you can load balance resources.
If someone can show me a multi seat gaming server that has native remote performance (as in you drag windows around in 144 fps, not the standard artifacty high latency behavior of vnc) I’ll eat a shoe.
Yep just ping time and latency make this a no go for a vast majority of us.
Thin clients absolutely can do this already. There are a variety of ways to transmit low latency video around a home from HDBaseT solutions to multicast / network driven ones. Nevermind basic solutions like sunshine /moonlight… Nvidia variants etc.
I have a single racked PC for feeding my home which has 3 ‘desk’ endpoints and two tvs… all of which are fed from the same location and can be dynamically matrixed (albeit the choke point is usb2 to each location because I’m cheap.). Latency is maybe 1.5-3 frames from live. Other solutions are normally around 5-8 which while higher are sufficiently snappy and won’t effect competitive play (professional level notwithstanding.)
A lot of latency comes down to tuning your solution and research. The vnc method you refer to is the lowest common denominator running on ancient technology and codecs simply because it is a widely supported standard.
Edit: As far as 144 goes- I don’t have any displays that run that but I have two running at 120 with no issue.
What is the cost of the thin clients and are you doing this over copper?
Are your desks multi monitor? To get the bare minimum in my households scenario I would need at least 12 streams at greater than 1080p
For 5 seats how much did it cost versus just having a computer in each location? For example looking at hdbaset to replace just my desk setup, I would need 4 ~$350 devices, just looking at monoprice for an idea (https://www.monoprice.com/product?p_id=21669) which doesn’t even cover all of the screens in my office.
The two workstation nooks (spaces) have the capability to have a second monitor but I’ve since retired them in favor of ultrawide monitors which I find are a better experience in general. My current working solution is a split between two technologies: one thin client (second monitors) and one network distribution solution using multicast (primary displays and USB). Both run on copper 1 gig but the multicast traffic requires a switch that doesn’t suck and vlan usage. On average a single port can reach 70-85% usage sustained. I believe my longest run is 150’ ish.
Cost per node is roughly 300- so comparable to what you are experiencing. If I went stupid cheap I could probably cut that to maybe 150-250 depending on my luck with eBay and patience.
In terms of capabilities you could argue that this could be done without distribution using a nuc solution… but you’d have to split resources to reach node you’d need a full feature set at.
My central server is a threadripper build with 2 gpus for direct passthrough to ‘gaming’ vms and a split gpu handling the rest of the needs of the other systems. Thanks to the matrix capabilities any given seat can be any system… or in some cases 2 seats can be a single rig (2 room gaming off the same display). There is a cost savings to be found in splitting resources from a more expensive build out to cheaper nodes… but ymmv depending on active seats and specific needs. I believe as a general rule it should be less costly and more efficient (power/heat) than individual solutions.
Thanks for the breakdown! This is probably the most helpful breakdown I’ve seen of a build like this.
Absolutely 👍. I’ll just add that there are a lot of alternate routes to get the result you want so research and experiment but ideally set a deadline which can help with decision paralysis. Later changes are a problem for future you 😁.