My testing setup is, all on the same subnet, ipv4

  • Windows Machine with Intel x520
    • Direct Connect 10Gbps cable
  • USW Aggregation switch (10Gbps)
    • Direct Connect 10Gbps cable
  • Synology NAS with Intel x520
    • SRVIO Connection
  • Debian VM
iperf3 Windows To Debian: 6Gbits/sec 
.\iperf3.exe -c 192.168.11.57  --get-server-output
Connecting to host 192.168.11.57, port 5201
[  5] local 192.168.11.132 port 56855 connected to 192.168.11.57 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.01   sec   817 MBytes  6.79 Gbits/sec
[  5]   1.01-2.00   sec   806 MBytes  6.82 Gbits/sec
[  5]   2.00-3.01   sec   822 MBytes  6.85 Gbits/sec
[  5]   3.01-4.00   sec   805 MBytes  6.81 Gbits/sec
[  5]   4.00-5.01   sec   818 MBytes  6.81 Gbits/sec
[  5]   5.01-6.00   sec   806 MBytes  6.82 Gbits/sec
[  5]   6.00-7.01   sec   821 MBytes  6.83 Gbits/sec
[  5]   7.01-8.00   sec   805 MBytes  6.80 Gbits/sec
[  5]   8.00-9.01   sec   820 MBytes  6.82 Gbits/sec
[  5]   9.01-10.00  sec   809 MBytes  6.84 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.00  sec  7.94 GBytes  6.82 Gbits/sec                  sender
[  5]   0.00-10.00  sec  7.94 GBytes  6.82 Gbits/sec                  receiver

Server output:
-----------------------------------------------------------
Server listening on 5201 (test #9)
-----------------------------------------------------------
Accepted connection from 192.168.11.132, port 56854
[  5] local 192.168.11.57 port 5201 connected to 192.168.11.132 port 56855
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   806 MBytes  6.76 Gbits/sec
[  5]   1.00-2.00   sec   812 MBytes  6.82 Gbits/sec
[  5]   2.00-3.00   sec   816 MBytes  6.85 Gbits/sec
[  5]   3.00-4.00   sec   812 MBytes  6.81 Gbits/sec
[  5]   4.00-5.00   sec   812 MBytes  6.81 Gbits/sec
[  5]   5.00-6.00   sec   812 MBytes  6.81 Gbits/sec
[  5]   6.00-7.00   sec   815 MBytes  6.84 Gbits/sec
[  5]   7.00-8.00   sec   811 MBytes  6.80 Gbits/sec
[  5]   8.00-9.00   sec   814 MBytes  6.82 Gbits/sec
[  5]   9.00-10.00  sec   815 MBytes  6.84 Gbits/sec
[  5]  10.00-10.00  sec  1.12 MBytes  4.81 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.00  sec  7.94 GBytes  6.82 Gbits/sec                  receiver


iperf Done.
iperf3 debian to windows 9.5Gbits/sec 
.\iperf3.exe -c 192.168.11.57  --get-server-output -R
Connecting to host 192.168.11.57, port 5201
Reverse mode, remote host 192.168.11.57 is sending
[  5] local 192.168.11.132 port 56845 connected to 192.168.11.57 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.01   sec  1.11 GBytes  9.40 Gbits/sec
[  5]   1.01-2.00   sec  1.09 GBytes  9.47 Gbits/sec
[  5]   2.00-3.01   sec  1.11 GBytes  9.47 Gbits/sec
[  5]   3.01-4.00   sec  1.09 GBytes  9.47 Gbits/sec
[  5]   4.00-5.01   sec  1.11 GBytes  9.47 Gbits/sec
[  5]   5.01-6.00   sec  1.09 GBytes  9.47 Gbits/sec
[  5]   6.00-7.01   sec  1.11 GBytes  9.47 Gbits/sec
[  5]   7.01-8.00   sec  1.09 GBytes  9.47 Gbits/sec
[  5]   8.00-9.01   sec  1.11 GBytes  9.47 Gbits/sec
[  5]   9.01-10.00  sec  1.09 GBytes  9.47 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  11.0 GBytes  9.46 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  11.0 GBytes  9.46 Gbits/sec                  receiver

Server output:
-----------------------------------------------------------
Server listening on 5201 (test #7)
-----------------------------------------------------------
Accepted connection from 192.168.11.132, port 56844
[  5] local 192.168.11.57 port 5201 connected to 192.168.11.132 port 56845
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  1.10 GBytes  9.42 Gbits/sec    0   2.01 MBytes
[  5]   1.00-2.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   2.00-3.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   3.00-4.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   4.00-5.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   5.00-6.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   6.00-7.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   7.00-8.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   8.00-9.00   sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]   9.00-10.00  sec  1.10 GBytes  9.47 Gbits/sec    0   2.01 MBytes
[  5]  10.00-10.00  sec  2.50 MBytes  7.72 Gbits/sec    0   2.01 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  11.0 GBytes  9.46 Gbits/sec    0             sender


iperf Done.

I find that rather curious, something in the windows 10 tcp settings that limit the outgoing throughput, window size maybe?

Debian MTU 
ip link show ens3 | grep -i "mtu"
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
Windows MTU 
netsh interface ipv4 show subinterfaces

   MTU  MediaSenseState   Bytes In  Bytes Out  Interface
------  ---------------  ---------  ---------  -------------
  1500                1  273580016987  64376522487  Ethernet 4
  • N0x0n@lemmy.ml
    2·
    5 days ago

    Thanks for the clarification ! It wasn’t clear to me what I was looking at first sight. I fought that was some self-hosted/DIY 10Gbs router/switch. Sorry if my question came the wrong way or was a stupid one. I’m just a curious guy !

    Thanks for the additional information !!