Previous Gitea user and now Forgejo, and yeah it’s a great git server. Simple, lightweight but still very capable.

Manyfold is great for this usecase.

deleted by creator

Yeah that would be the best way to solve this problem.

Well you keep saying monitor a domain, in that case a DNS monitor would make more sense than HTTP(s) since that’s for monitoring a service. That’s why I was a bit confused. But yeah try to enable the ignore SSL option and see if that changes anything. You didn’t include a screenshot of the settings which makes a bit difficult to diagnose the problem so I will leave it here.

Which one of those. You pick one when adding something new to monitor. Actually just send a screenshot of the uptime-kuma settings of one of the services that are giving you problems.

Sorry I’m a bit confused. What kind of tracker are you using in uptime-kuma and what address is it pointing to?

If you ping the domain from inside the container, does it succeed?

It’s extremely simple. Although I prefer ZFS I will give you an example with BTRFS since it’s easier to get going. RAID1 in BTRFS is considered stable (RAID5/6 is not).

sudo mkfs.btrfs -m raid1 -d raid1 /dev/sdx /dev/sdy # Create raid array with BTRFS
sudo mkdir /mnt/storage # Create your mount directory
echo "/dev/sdx /mnt/storage btrfs noatime,compress=zstd 0 0" | sudo tee -a /etc/fstab # Set raid array to mount at boot
sudo mount -t btrfs -o noatime,compress=zstd /dev/sdx /mnt/storage # Manually mount the first time

You would also probably wanna set up a btrfs scrub once per month, either with systemd-timers or cron, whatever you prefer.

If OP can find a V3 KE for a decent price then you get filament runout sensor and network connectivity, among with some other nice stuff. And for the failed print detection you can add a Nebula camera which isn’t too expensive if you order it from Aliexpress. It also supports rooting so you can add some really nice stuff to it, like Mainsail. I have a KE and I’m pretty happy with it since I got it for a really good price. I don’t think I would recommend it at full retail price though.

It will yeah, although with modern SSDs it really isn’t a big problem. I’ve used an Samsung 840 EVO as L2ARC for 8 years now.

Try running a flow rate calibration in Orca slicer and adjust settings accordingly

Try changing to another upstream DNS server in Adguard (such as https://dns.cloudflare.com/dns-query) and see if the problem gets resolved?

Always had trouble with Nextcloud but ever since deploying it on NixOS it’s been rock solid. Both performance and reliability.

Personally I would go for ZFS with the SSD as a L2ARC. But among the options you listed I would do BTRFS RAID1 if you’re only gonna use two HDDs, and mdadm RAID5 with BTRFS on top if using three.

There is a flatpak but it’s not published to flathub https://github.com/SoftFever/OrcaSlicer/tree/main/flatpak